Switch BNS

Switch for universal use. The emergency stop switch is triggered by pressing or hitting the red button and then secured against resets by a shackle lock. Alternatively, the switch can be designed as a cable switch or as a locking cable switch.

The installed luminous diodes can be activated by the application program if the switch has been pressed.

The following functions can be called in the device:

• Start-up warning or signal tone via piezo tone emitter
• Selective start-up warning or signal tone via freely selectable groups
  
• The charging state of the operating voltage of the bus is transferred to the control unit and is then available as service information.

The switch can be realized in various designs:

• Signal switch in cableway systems
• Emergency stop switch with locking function
• Cable switch in cableway systems with a tensile force of 150N or 240 N
• Cable-operated emergency stop switch, locking, with a tensile force of 150 N or 240 N

When assembled, the device is available with two BETACONTACT system plugs or with cable leads and a field bus terminal strip in a terminal housing.